I've already asked for incoming fit-up to be kept with the bracket results. Now I have two released readings for the same sample, taken from different supports. One passes, one doesn't. Which method should our FR5 fixture comparison use before anybody blames the fixture?
Which released bracket reading belongs in our FR5 fixture comparison?
AmyAbbott0032 · 2025年12月11日 11:23 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
4 条回复
Quality must settle the drawing reference and measurement method. Do not average the two readings.
8分Quality found one inspector resting it on the gusset rather than the specified locating faces. They're checking which old sheets used that method. No new fixture decision yet.
6分Can the affected samples still be identified for a proper comparison?
6分Amy, I would have both inspectors try the agreed method on the retained samples before you write a replacement instruction. A diagram can look clear to its author while the person holding an awkward bracket finds another apparently sensible way to rest it.
7分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .