Our two cover inserts fit the same carrier. The wrong one even lets the sample sit flat. Someone has proposed green paint on the correct insert, but the recipe screen only names the carrier. That's a lot of trust in one paint mark.
two fr10 inserts, one very convincing wrong fit
AnnaAli0242 · 2025年12月11日 03:40 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
6 条回复
回复 AnnaAli0242
Can either insert also fit backwards? Paint might help a person find the intended part, but you have two different mistakes to deal with if the same piece can go in the wrong way.
14分回复 LeoAli0188
Yes. Both ways bolt down. Backwards puts the relief on the wrong side.
22分回复 AnnaAli0242
Then review a keyed mounting too. Don't make colour carry the whole changeover.
12分A key deals with orientation only if its design actually distinguishes it. I would also ask which insert identity the recipe is checked against; the carrier name cannot answer that.
20分回复 LeoAli0188
I've asked tooling for the physical distinction and controls for the insert-to-recipe check. Keeping those as separate questions. Nobody gets to answer both with a tin of paint.
15分回复 LeoAli0188
Yes, Leo. I meant a reviewed design, not any convenient extra pin.
6分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .