We have 51 packed cartons in the proposed first trial. Supplier showed a smooth untaped sample. Our boxes have normal tape overlaps, printed areas and two board finishes. I want the comparison to include what arrives at the station, not a cleaned-up carton prepared for the photograph.
fr10 vacuum sample omits our taped seam
JasperAli0203 · 2026年3月25日 01:12 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
14 条回复
Have packing identify ordinary accepted examples across those conditions, then ask the supplier to compare the complete pickup, transfer and release. Keep the preparation they perform visible too
11分回复 MinaBell0685
Packing has selected examples. The tape overlap is within its accepted range; we aren't proposing to reject those cartons before the tool sees them.
9分Include who presents them. We had a proposal where somebody quietly rotated every box to offer the clean face, then everyone quoted the robot time as though that person didn't exist.
5分And ask what happens when the pickup condition is not met. The operator needs a defined response, not a demonstration that only shows the cartons which sealed.
9分回复 TheoBell0671
Theo's preparation point can decide the job. In our comparison the extra handling overlapped packing work, so the problem was not just a few seconds added to the timer.
0分回复 TheoBell0671
Supplier asks us to turn the boxes so the cups avoid the seam. That would be extra preparation by the packer, not our current incoming arrangement.
15分Treat that as a different workflow option, then ask whether they can also assess the existing presentation. You need both the technical result and the labour implication
1分Nadia, did you abandon that option or find a different person to do the preparation?
3分回复 TheoBell0671
We abandoned it for that order mix. Nobody had spare capacity at the right time, and adding cover removed the benefit. Another allocation might work elsewhere; ours did not.
4分回复 MinaBell0685
For Jasper's samples, keep both finishes and the ordinary seams in each defined option. Otherwise the rotated-box test could quietly become a nicer-board test as well.
16分Both options are in the request now. Packer is estimating the extra preparation against those same cartons. Supplier hasn't completed a representative handling trial yet.
0分Thanks, Nadia. That's the bit our estimates tend to call available labour until somebody asks available when.
10分Rosa, the failed-pick indication and who handles the carton are also in the trial brief. No vacuum-tool acceptance from the smooth sample.
5分Keep the complete results when they arrive, including unsuccessful pickups and release problems; a selected clip would put you back where this started
16分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .