We're considering Fairino FR5 for machine fixture loading with a machined brass blank in a supervised machine tending bay, with 57 planned. The sketch reaches the fixture.
Trouble is, we left out the gripper body and open door. I'd like to check access properly before choosing an arm.
Fairino FR5: Can this reach sketch support an arm choice?
ReeceChan1080 · 2026年7月19日 20:17 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
4 条回复
@ReeceChan1080 Got measured outlines for the opening and gripper? An offline layout might catch what the reach circle misses.
11分Checked them. The approach clips the handle; the workpiece clears. No wonder my first sketch looked so reassuring.
11分@ReeceChan1080 Use that measured layout to review the complete approach and retreat offline. Include the tool, cables and service access, then ask the integrator to assess a revised mounting arrangement.
13分The buyer has suggested choosing a larger arm. I'm unsure whether that would address the access issue or simply increase our purchase while leaving the obstruction unresolved.
4分