简体中文界面。帖子、指南及政策正文保留原文；未对原文作自动翻译。
Lewis_Blair · 2025年12月25日 08:34 UTC
Ask the layout owner to list the missing geometry on that view. Full tool assembly, held blank and actual door position are needed for the route check. A coloured part doesn't fill those gaps.
7分Toolmaker owns the body drawing, integrator owns the layout; neither seems to own putting them together
10分I'd ask the integrator to confirm who will assess the combined arrangement, Lewis. I've also been chasing a combined view on a fixture-loading proposal. Having all the separate drawings in my inbox still doesn't tell me whether their revisions belong together.
16分Our handovers have confused an installation shortage with a spare before. Here I would name the missing drawing, not say the gripper is missing, if the physical tool already exists.
20分Only proposed tooling, Owen, no physical gripper yet; missing drawing is the right wording anyway
8分Include the proposed connections behind the body in the assembly request, with their routing needs, since a body outline alone may still leave the most awkward part unspecified.
9分And define the required movements. Reach to the loading pose is one check. Entering with the blank, opening for release and withdrawing are other parts of the same job.
5分Elliot, I'd put those on the same drawing request. Separate emails about each omission were getting me separate replies, all perfectly responsive and none showing the combined job.
14分Integrator has taken the combined review; release, withdrawal and connections are in one request, with the proposed assembly revision named
16分Who supplies the door survey, Lewis?
20分Our maintenance lead; survey requested, not done yet, so the open panel stays marked unknown
22分Have that survey identify the intended open position and relevant projections as well as the opening, otherwise the layout may gain an accurate hole while still omitting the door beside it.
9分Does the setter need that same front area for fixture removal? I would include it now if so, even though you haven't chosen a stand or proposed moving one.
11分Yes, fixture comes out at the front; I've got the setter on the review list now
7分Ask the setter to show the removal route, not only where they stand. The fixture itself needs somewhere to go once it is out.
18分He's marked that on the planning copy; thanks, Elliot, I'd only drawn his standing space
10分Did maintenance get the door position measured?
6分Door survey is back; tool connections still undefined, so the combined assessment and stand choice are waiting on those
5分此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .