简体中文界面。帖子、指南及政策正文保留原文；未对原文作自动翻译。
JamieAllen0295 · 2025年8月2日 09:45 UTC
Full gripper assembly, held blank and the door in its real open position. Has anyone measured that position on your machine, or borrowed a drawing from a similar one?
25分Borrowed drawing, and I found the door slides the other way on ours; the layout person hasn't visited the bay yet
-2分That needs a survey before choosing the base position. Otherwise you're correcting the wrong machine, just with a more convincing gripper.
9分Survey requested, with our setter there; I can supply the current tool assembly model now, including the finger extension that was left out
10分Which tool revision? Extensions have a habit of changing between attachments.
8分On our loading review, a simple full-size tool outline helped expose a blocked approach before detailed work. Yours could do the same once measured, although clearing that outline would not finish the route assessment.
19分Revision D, Imran, and I've checked the model and quote both name D; Jonas, did you include the fittings in your outline?
6分Our survey missed where the setter stood with the fixture trolley. Mark that space too. A robot layout can fit while the changeover no longer does.
9分Yes, Jamie, including the fittings that stuck out beyond the body. We also marked the service routing as needing a separate check rather than pretending the rigid outline covered it.
2分Thanks for the revision, Jamie. That gives the review a fixed starting point.
4分Did the survey happen? Interested whether the real door leaves any useful approach on that side.
25分Survey done, door overlaps the loaded tool on the sketched approach; integrator has suggested rotating the base layout and wants our setter to check the alternative before detailing it
10分Is that alternative still on the same side of the machine?
12分And include maintenance in that check. On ours the tempting free space was where a cover had to slide out. Easy to miss when the cover is shut.
9分Same side but farther along, Robin; Emma, maintenance has marked the cover removal area on the survey, and the candidate position is clear of that area on paper
7分Does the proposal include withdrawal with an empty tool as well as entry holding the blank? That was the awkward part of our earlier review, despite having less material on the way out.
7分Paper clearance sounds promising. Still need the whole route.
15分The setter happy with that position, Jamie? Moving along the machine might leave the door clear and make fixture loading awkward for them.
25分Setter wants the trolley approach changed before agreeing; Jonas, the integrator's next review includes empty withdrawal, so I'm leaving the arm choice open until both questions are answered
6分Put the proposed trolley route on that same drawing. Separate sketches made our last access meeting unnecessarily exciting.
25分此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .