We drew the proposed FR5 beside our steel-blank machine with the door shut. Then somebody opened it and stood exactly where the gripper was meant to wait. Not a promising start.
I'd like to bring a decent set of measurements to the supplier before we discuss moving the base. What did you find was missing from your first machine-access sketch?
the door takes up space too
NathanBell0634 · 2025年9月30日 05:00 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
3 条回复
The complete held tool, including fittings, is often absent; measure the actual open-door outline and fixture location too, then ask for entry and withdrawal on that same layout.
25分回复 NoraChen1192
The air fitting is a good catch. Our proposed tool picture ends at the gripper body, and the door has an inside handle missing from the outline. I'll include both rather than draw another optimistic waiting point.
7分And include the setter's working space before comparing base positions, because clearing the door with the robot does not necessarily leave a workable changeover.
25分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .