Our imported handling package stops intermittently - tray unloading

HarishBennett0750 · 2026年5月20日 16:19 UTC

回复讨论

主帖中文翻译暂不可用,以下显示英文原文;回复保留原文。 查看英文原文

HA
HarishBennett0750
We bought an imported handling package from an unnamed seller through the Alibaba marketplace. It uses Universal Robots UR5e for tray unloading with an aluminum spacer block in a supervised tray handling cell and stops intermittently. My support report has been open for 5 days. The seller requested more information after receiving my phone video, and I need to understand what would narrow the fault down.

16 条回复

LU
LucaBarnes0526

The alarm text and sequence position would help focus your report. Do you have the alarm as displayed before restart, and can you place the stop relative to release?

24分
HA
HarishBennett0750

I now have the alarm indicating a missing process confirmation. Reviewing the unedited video places the wait before release, so my original description of a dropped workpiece was inaccurate.

14分
LU
LucaBarnes0526

Send a corrected description supported by the exact alarm, full recording and installed version details. Ask support to identify the expected confirmation and assign responsibility for the next diagnostic action.

24分
HA
HarishBennett0750

Worth leaving my original description visible? It's wrong, but deleting it might make the replies look odd.

6分
LU
LucaBarnes0526

Leave the original account readable and add the correction prominently. Explaining that the unedited recording shows a wait before release gives support a reason to revise its diagnostic focus.

25分
JO
JonasBennett0720

@LucaBarnes0526 On my setup, the arm and gripper contacts both thought the other owned the test. Naming one coordinator helped us get an actual next step.

12分
HA
HarishBennett0750

Our correspondence shows a similar coordination gap. Both contacts refer me back to the other's response, and I can't find an assigned owner for the test.

21分
LU
LucaBarnes0526

That missing confirmation points to the gripper, so its contact should take the diagnostic lead.

16分
DA
DanielBell0652

You're jumping from a missing signal to a failed component. It could be the interface or sequence. The alarm doesn't assign ownership by itself.

11分
LU
LucaBarnes0526

I was too definite about the source. The package seller should coordinate investigation of the missing confirmation through the interface and bring in the relevant contacts without assuming a component has failed.

7分
FA
FarahBarnes0591

Is that Alibaba support, then? I'm muddling the seller and the place you bought it.

7分
LU
LucaBarnes0526

I mean the business that sold you the package through Alibaba. The marketplace and that seller have different roles; this technical coordination request goes to the seller's support arrangement.

25分
HA
HarishBennett0750

I have several logs but haven't established which capture the event. Is sending the entire collection useful, or should I narrow the attachment set?

13分
LU
LucaBarnes0526

Have support identify the required diagnostic files, then associate the supplied files with the recorded event and explain how they were collected. A large unrelated collection can make the relevant evidence harder to find.

20分
HA
HarishBennett0750

Correcting the symptom hasn't yet produced an agreed next step with support. We still lack a diagnostic action and the underlying issue is unresolved.

12分
LU
LucaBarnes0526

The corrected account is useful, but it hasn't resolved the lack of an agreed diagnostic action. Leaving the fault open reflects that.

11分

参与讨论

欢迎来到 Application Robot

所有人都可以阅读论坛。登录或注册后即可发起讨论、回复或上传照片。

忘记密码?

注册账号即表示你同意我们的 使用条款 和 社区准则。请阅读我们的 隐私政策 ,了解我们如何处理你的信息。