Our application sometimes misses the PLC's brief request for inspection-cycle coordination.
I'm reviewing that ordinary, non-safety handshake for Fairino FR10 in a workshop inspection station awaiting commissioning, with a fixture-mounted bracket in the setup.
Signal ownership and clearing conditions aren't clearly documented.
The safety functions are independently engineered and separate from this job interface.
A request pulse disappears between polls (Fairino FR10)
RebeccaBell0691 · 2026年7月19日 12:07 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
4 条回复
Does your trace show when the PLC request is raised and cleared relative to application polls, including which side performs the clearing?
5分@FionaBrooks0847 I've compared the trace: the PLC raises and clears the request between consecutive application polls, with no observed acknowledgement before it clears.
9分Take an ownership table and a retained-request proposal to the interface owner. A request held until matching acknowledgement should settle the handshake in an offline review.
8分Settle it? Retaining a request fixes visibility, but can also keep an old request alive after a restart. Identity and reset rules matter.
-1分