I'm putting together the fixture section of our UR5e bracket training, but the archive labels a clamped face-alignment check before and a released hole-spacing failure after, which seems to invite a movement calculation from measurements of different things.
our bracket lesson calls two different checks before and after
GabrielBennett0714 · 2026年2月7日 05:27 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
3 条回复
Ask quality to name the measured feature and reference for each check. Are they even intended to be compared as dimensions, or did the before and after labels get added later for the lesson?
18分回复 MinaChan1120
The labels were added for the lesson; quality confirmed that face alignment and hole spacing are separate checks, and the identified bracket really did fail the released spacing requirement before correction.
9分Then the lesson can show those separate stages without calculating a change between them. Keep the released failure and correction attached to that bracket. The misleading comparison does not make the actual failed dimension disappear.
18分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .