简体中文界面。帖子、指南及政策正文保留原文;未对原文作自动翻译。

I cannot call our tray locator a finished fix yet

FionaAdams0151 · 2026年6月8日 15:19 UTC

回复讨论
FI
FionaAdams0151
I added a tray locator to our FR10 loading fixture. The aluminium puck picked up better in the supervised runs, then missed after I changed the tray. I want to keep the improvement in my report without telling the next shift it is fixed.

6 条回复

BE
BenCarter0979

Were those successful pickups all from one tray seating? Several cycles can give you very little information about replacement if the tray never leaves its locators.

18
FI
FionaAdams0151

Yes, I left the first tray in place. I counted pickups but did not count how many times I seated a tray. That is a gap in my notes.

6
OW
OwenChen1182

I'd keep that distinction right up front. Ten goes at an easy seat can look lovely. Was the second tray visibly rocking? I can't tell from the pickup alone

14
FI
FionaAdams0151

I did not check rocking before the miss. I have both trays still, so I can compare how they sit without buying another locator first.

19
BE
BenCarter0979

If you mark each tray and record its seating observations, you can give the fixture person something repeatable to investigate. Include the misses in the same record as the successful pickups.

8
OW
OwenChen1182

Fiona, any luck comparing those seats? I'm curious whether the locator helps one tray and annoys another. Report can stay unfinished while you find out

7

参与讨论

欢迎来到 Application Robot

所有人都可以阅读论坛。登录或注册后即可发起讨论、回复或上传照片。

忘记密码?

注册账号即表示你同意我们的 使用条款 社区准则。请阅读我们的 隐私政策 ,了解我们如何处理你的信息。