I overlaid the packaging section on our FR5 pallet sketch and the carton bearing edge sits right in the proposed finger channel, so I need both reviewers looking at this together before anyone orders the tool
our fr5 cartons get support only when the fingers disappear
HassanBarnes0530 · 2026年3月24日 22:31 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
7 条回复
Send the overlay with the filled-case identity and lower-layer revision; ask for support and complete tool withdrawal to be reviewed as one arrangement
0分回复 MeiBell0690
Sent it, and found packaging used an empty case in its first explanation; the actual component load bears near the ends, not across the middle
6分Has packaging seen that actual load arrangement?
9分That changes the support question. Keep the empty-case example labelled as such so it doesn't keep returning as approval for the packed one.
0分回复 RickShift
Rick, yes, the packing lead has the filled case and confirmed the load position; thanks Mei, the empty-case slide is withdrawn from this review
6分And the tool designer has the same section?
2分回复 RickShift
Hassan, make the section part of the shared revision, not another loose attachment someone has to remember to open
9分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .