Our FR5 tooling supplier demonstrated a smooth carton. The production version has printed board and a taped seam through the proposed pickup area. I have retained examples from both packaging sources.
What should the comparison cover before we accept the vacuum concept? The demonstration did not use these cartons.
The tested carton had no tape under the cups
EllaBennett0729 · 2025年5月30日 05:20 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
7 条回复
Use your filled cartons, with the actual seam and print positions included.
8分Samples sent. The supplier suggests moving the cups either side of the seam, but the carton width varies between our two sources.
0分Ask them to show that arrangement on both sizes.
8分Does the tool still clear the carton flaps and release cleanly in the receiving lane?
-3分Not checked in their first proposal. I have added the receiving lane dimensions and requested the full transfer and release with both carton types.
9分One source's carton passed the revised supplier trial; the other leaked around the printed area. They are reviewing another contact arrangement. Acceptance remains open for the mixed supply.
13分Any result on that second carton yet?
15分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .