Our proposed FR5 stand was chosen from a reachable point inside the mill. I need the complete gripper, held brass blank and measured open door assessed before that point becomes a purchase decision.
Cannot choose the FR5 stand from a brass-blank point alone
HazelAdams0136 · 2025年12月23日 14:05 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
4 条回复
Ask for the actual exchange route, not just the deepest pose. The tool can reach the blank and still fail to withdraw through the opening. Include its body, open and closed finger states where relevant, adapter and connections, with the blank at the intended grip depth. The machine view needs the real handle and door position. And let the setter check the same stand location with their fixture-change route, because a robot-clear position can be a nuisance for everyone else who uses the mill.
17分The supplier has sent the complete tool model. Machine owner has added the open door and handle. The combined route review is pending; the setter has rejected one alternative for blocking fixture removal.
21分Was that rejected alternative the original stand position, Hazel, or a second candidate?
7分A second candidate. Original position remains under review. I have corrected the comparison heading so the setter's rejection cannot be read as the result for both.
11分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .