简体中文界面。帖子、指南及政策正文保留原文；未对原文作自动翻译。
OscarBrooks0793 · 2026年8月1日 03:30 UTC
Identify each blank and measure its relevant dimensions alongside its seated projection, using agreed references.
8分Can one identified blank be loaded repeatedly under the approved manual procedure? Comparing different blanks once each confounds part variation with repeatability of seating.
9分And repeat the measurement without reloading, or measurement variation gets called seating variation.
22分Yes, we can organise that with the machine owner under the manual procedure. I had only planned to measure a row of different blanks. That would still leave us guessing which part of the spread came from loading.
7分Record end condition and visible contamination too. Do not silently clean away an unusual observation.
17分Anika, record as found first, certainly. But I would not imply the operator must repeat a load in an unsuitable condition just to preserve the study. The approved procedure determines what can be tried.
6分Agreed. Record any permitted cleaning before the next comparison; do not repeat an unsuitable load.
6分Also note whether projection is measured clamped or unclamped. Same reference each time.
13分The draft now separates repeated measurement, repeated loading of one identified blank and comparison across blanks. It records the measurement state and any preparation changes. No results yet, and automatic loading remains unauthorised.
12分That can distinguish several contributions without assuming any one is the cause. When you have results, retain the individual readings; one spread number will not show which blank or loading attempt behaved differently.
14分