I won't approve the alternating pattern yet. The boxes fit, but their reinforced ends bridge gaps below. Tooling wants some of those gaps for release. Packaging and tooling need the same drawing.
FR5 carton layer with unsupported reinforced ends
AnikaChan1117 · 2025年10月10日 11:10 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
7 条回复
Does the current drawing show the load-bearing areas of the packed carton, or only its outside rectangle? That distinction should be visible before comparing gap positions.
17分Only outside rectangles. I overlaid the carton supplier's underside sketch and found the clash. Nobody had put that sketch in the tool review.
10分Show a section through those areas and the open fingers, including withdrawal. The final open position may not be all the space the tool needs.
17分Dinesh, would you include the pallet deck in the same section? Their first layer could have a similar issue even before rotation.
-4分Yes, deck and lower layer. And use the actual filled carton construction; an empty box comparison would be too easy.
10分Both are on the requested section. We are also asking for a lower-count arrangement to compare if packaging rejects the original. Nothing selected.
20分Does the lower-count proposal include any changed partial-pallet handling? That work should stay visible when the prices are compared.
8分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .