I'm holding our FR5 selection because the mill unloading sketch shows the polymer blank but not the gripper body or open door; what should I put in the review request so the next drawing includes the awkward bits?
The polymer-blank sketch leaves out the loaded FR5 fingers
HarishCarter1011 · 2025年8月17日 16:28 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
7 条回复
Ask for the actual machine survey and complete loaded tool, through approach and withdrawal.
6分Machine owner has measured the open door, toolmaker has the full assembly, but nobody has combined them yet
5分Who owns the combined layout? Give that person both references.
14分Integrator owns it, and I've supplied machine survey M2 and tool assembly C with the intended blank orientation
2分Has the combined view changed the proposed base position?
20分Not yet, it shows a tool-body clash on the original withdrawal; they're assessing a changed orientation before proposing a base move
15分Keep the setter involved if they propose moving it. Interested what the orientation review finds first.
13分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .