Our FR10 removal proposal shows the cylindrical blank clearing the fixture, but neither the gripper body nor open door is modelled; I want the missing geometry compared before choosing the arm.
our fr10 removal sketch reaches the aluminium blank without its tool
OwenArcher0399 · 2026年1月9日 08:55 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
4 条回复
Ask for the complete tool holding the blank against a surveyed opening, with the intended door position identified. Include loaded withdrawal and the empty return, not only the reachable pickup pose.
15分Tool designer has supplied the held-blank assembly, including adapter and fittings; setter is surveying the door travel and fixture-change route, with no stand position accepted yet.
14分Has the survey been completed, or is it still an assigned task? The purchasing comparison should keep that distinction visible while the tool model is reviewed.
14分Completed now and sent to the integrator; its door-linkage detail creates a question on withdrawal that the catalogue picture missed, so the combined route assessment remains open.
10分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .