I'm reviewing an FR5 machine-tending option for brass blanks. The sketch reaches the fixture with the part, but doesn't include the gripper body or open door. What should the supplier show before we settle the base position and pass this to purchasing?
brass blank clears, tool and door still missing
ZaraBaker0482 · 2025年7月15日 18:29 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
8 条回复
Ask for the proposed complete tool holding the blank through entry, placement and withdrawal, with the actual opening and door positions; the setter also needs to see how the arrangement leaves access for changeovers.
4分回复 AnnaBell0677
Supplier has the tool drawing but used an old machine model with no inside door fittings. We are asking the machine owner for current dimensions before another access plot is issued.
6分Make sure they identify the tool revision too. Old geometry can look perfectly convincing.
11分Tool revision D now confirmed against the quote. Updated door fittings rule out the first approach. Toolmaker is comparing a changed orientation and an alternative base location with the integrator.
22分Has either option been checked with the blank still held on the exit route?
5分And is either base position taking the setter's access space?
13分Those checks are in progress together. One base option conflicts with fixture removal, so we have not accepted it just because the robot route looks better. The alternate orientation remains provisional.
7分Did the combined review settle on a usable arrangement, Zara, or are tool changes still being considered alongside the base positions?
25分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .