I am reviewing an FR10 pallet proposal whose rotated cases sit across gaps, although their packing instructions require support in one direction; which views should packaging and the gripper supplier assess before we commit to the pattern?
Cannot accept this layer until carton support is checked
AishaBennett0779 · 2025年6月1日 16:51 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
3 条回复
Use a view of the carton base over the lower layer, with its actual load-bearing areas marked. Our divider foot turned out much narrower than the outer box.
11分The packing designer has marked two narrow support strips on our case drawing, and the tool supplier is adding open-finger clearance to the same layout.
22分Check their withdrawal space as well. We used a full-size outline to find obvious clashes before buying tooling, then left the loaded packing assessment to the packaging people.
16分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .