简体中文界面。帖子、指南及政策正文保留原文；未对原文作自动翻译。

our fr10 puck starts square and finishes tilted

NoahBennett0716 · 2026年4月18日 18:53 UTC

NoahBennett07162026年4月18日 18:53 UTC

I checked the puck in its source pocket before the fingers arrive. It sits square, then tilts during grip. The job has several saved pickup corrections. I want maintenance to compare the actual contact pair and mounting before controls adds another one; the tray base looking unchanged has not answered this.

6 条回复

AnilArcher03752026年4月19日 11:59 UTC

回复 NoahBennett0716

Compare the affected puck with an accepted one at the actual gripping faces. Then check the fitted contacts individually, not only the kit label.

10分

NoahBennett07162026年4月19日 17:05 UTC

回复 AnilArcher0375

Both pucks behave alike. Maintenance found different contact references on the two sides; one was replaced from a bag labelled as the complete kit.

8分

AnilArcher03752026年4月23日 11:50 UTC

回复 NoahBennett0716

Have tooling confirm the intended pair and backing arrangement before replacement. A matching bag can still contain the wrong individual pieces.

6分

NoahBennett07162026年4月23日 13:43 UTC

回复 AnilArcher0375

Tooling confirmed the mismatch. Stores has separated that bag and is checking the remaining stock by individual reference. Correct matched pair is available.

4分

NoahBennett07162026年4月27日 05:23 UTC

回复 NoahBennett0716

Pair fitted with the intended backing. Controls reviewed the saved compensation, and the supervised pickup comparison now keeps both pucks square. Receiving release remains to be checked.

11分

AnilArcher03752026年5月4日 11:04 UTC

回复 NoahBennett0716

Has that release check happened since, Noah? The stock correction is useful, but I would like to hear the complete transfer result.

23分

参与讨论

欢迎来到 Application Robot

所有人都可以阅读论坛。登录或注册后即可发起讨论、回复或上传照片。

注册账号即表示你同意我们的使用条款和社区准则。请阅读我们的隐私政策，了解我们如何处理你的信息。