简体中文界面。帖子、指南及政策正文保留原文；未对原文作自动翻译。
TonyBailey · 2025年9月21日 13:40 UTC
Send representative packed cartons, with the surface differences identified. Ask them to assess the proposed contact positions through pickup, transfer and release, not only whether one cup seals.
10分We have two board sources and the seam is not in exactly the same place on both, so I'll include both rather than the nicest box from stores.
9分Include the packing condition as supplied. Flattened samples assembled specially for a demo can leave out the very variation you're trying to assess.
6分Our carton review needed packed samples before the contact layout made sense. Photograph the proposed positions on yours first; that may expose an obvious mismatch without paying for another head.
11分Hana's photo check is worthwhile. The supplier still needs to assess holding through the intended movement with the real load.
14分Hana, photos sent with both seam positions marked, and Callum, the sample request specifies our normal filled and closed condition; supplier is reviewing the pictures before arranging the trial.
8分Ask how the concept detects an inadequate grip and handles an unsuccessful pickup. That belongs in the proposal before acceptance too.
7分Will somebody have to rotate cartons to keep that seam away from the cups? Include the work in the comparison if the supplier proposes it. We can't assume the incoming orientation becomes convenient just because the demonstration needs it
13分Julia, no rotation step proposed yet, but I'll ask them to state any presentation requirement rather than leave us to discover it at the bench.
10分Supplier says the original head layout needs reconsidering for our seams and has requested the packed samples; we are still at that stage, with no revised holding test result.
22分That is worth finding before the order. Are both board sources going in the first trial?
15分此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .