I stood beside the mill with the proposed unloading drawing and could not work out where the gripper was meant to go. The brass blank follows a clear line out of the fixture, but there is no tool around it and the open door is barely an outline. We are choosing an arm from this. What should I ask the supplier and machine owner to put together first?
Our FR5 unloading sketch loses the fingers at the mill opening
StevenBlair · 2025年11月18日 19:13 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
5 条回复
回复 StevenBlair
Current machine survey and complete loaded-tool model, owned by one combined layout review. Check the survey is actually your mill. One of my current proposals borrowed an opening from the neighbouring machine and inherited clearance it didn't have.
14分Machine owner has supplied our opening and inside handle position. Toolmaker's assembly is still missing its connection fittings. Integrator has marked the path provisional and owns the comparison now.
13分回复 StevenBlair
Have the unresolved fitting space shown, not quietly omitted. And include the blank at its proposed grip depth through withdrawal. An accurate model of an empty gripper isn't your unloading job.
20分The provisional envelope intersects the handle on the original approach. They're comparing another approach from the same base. Setter is checking changeover access alongside it, not after an arm order.
13分回复 StevenBlair
Please post whether the complete fitting arrangement changes that result. A provisional envelope can reject an obvious clash, but the final tool still needs its turn in the comparison.
23分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .