Our FR5 layer drawing alternates the packed boxes, but the turned layer loses support under its bearing edges. I want packaging and tooling to settle that together before the pattern becomes the purchase requirement.
The turned cartons bear on our finger gaps
LeahBrooks0843 · 2026年2月21日 18:40 UTC
主帖中文翻译暂不可用，以下显示英文原文；回复保留原文。 查看英文原文
21 条回复
Put an actual packed box beside the section first. Which edges carry the load, and what is directly below them in the turned layer? People may be using turn to mean different things
2分回复 ChloeAli0222
Packaging marked the two long bearing edges. On the turned layer, parts of both bridge the channels left for the fingers. The section shows those gaps; the plan hides them.
23分Then that is the joint question. Closing the gaps may help packaging and trap the tool, so keep its release and exit on the same section
12分Why alternate at all? Is it required for this box or inherited from a prettier drawing?
16分Could be required, Rebecca. I would ask packaging before throwing out the arrangement.
16分Include the actual pallet beneath the first layer as well; the support question may differ there even if the repeated layers look identical in plan
17分回复 ChloeAli0222
Chloe, that's why I asked. I don't know their packing requirement.
12分Alternation came from the supplier's pattern library, not our packaging instruction. Packaging wants to compare a straight layer before adding a sheet. First-layer support is already drawn on the actual pallet, Priya.
5分Does the straight layer leave somewhere for the fingers to withdraw after placing the last box, or is only the finished stack drawn?
11分Only the finished stack so far. I have not seen its placement sequence.
20分Ask for that before making the straight layer the answer. The last placement is often less generous than the first
21分And does the straight version reduce the count?
5分Yes, one box fewer per layer in the sketch we have. Same packed box and pallet.
9分One fewer may be cheap compared with sheet handling. Depends how many extra pallets it creates, obviously.
8分I would prefer that tradeoff to another consumable, but dispatch wants the whole-order comparison. We also sometimes stop with an incomplete layer, which the supplier has not drawn.
11分Keep those incomplete layers in the support review; a satisfactory completed layer does not tell packaging what is carrying the last few boxes in a short order
10分Do you resume those same pallets later, Leah, or are they completed by a different route? That changes what the supplier needs to model
2分回复 ChloeAli0222
Same pallet can return later. Dispatch has an identified example with a short row left on it. They will join the review rather than send us a description of a typical pallet.
16分An actual awkward one. Good.
9分Joint review held. Packaging accepts the straight candidate's proposed support, but tooling found the return to that short row obstructs withdrawal. We have rejected the current continuation sequence, not approved the whole straight pattern.
15分讨论已关闭
此讨论已连续六个月没有活动，现已关闭新回复。 最后活动： .