CallumCarter0969 · 28 Feb 2026, 09:04 UTC
Ask for measured door and fixture geometry with the complete tool and actual blank position through removal, destination placement and return. Keep the intended grip fixed unless tooling proposes and assesses a change.
11 pointsTooling has the complete assembly drawing. Our survey shows the opening but not where the door parks, so I have asked the machine contact to add the panel, handle and linkage.
12 pointsWhere will the removed blank go, Callum, and is that receiver included in the same survey?
22 pointsInto a tray beside the bench. Its position is on the floor survey, but the receiving nest geometry has not reached the integrator's model yet.
2 pointsSend the nest too. Getting out of the mill is not the whole trip.
9 pointsAnd keep the fingers open after release in that nest. The loaded path may clear while the empty tool still catches the rim.
9 pointsThe combined model now includes the nest and measured door. Loaded withdrawal meets the door handle at the quoted stand position; a farther position is being assessed with the same tool.
23 pointsDoes the farther base block fixture changes?
20 pointsSetter has marked the required trolley space. The farther base clears it on the layout, but maintenance still needs to check the adjacent service-panel access.
10 pointsHas maintenance settled that access question, or is the new position still provisional in the quote?
11 pointsStill provisional. Maintenance needs the complete base footprint, not just the column circle supplied so far. No stand order; the original position remains rejected for the handle clash.
17 pointsThis discussion is closed to new replies after six months without activity. Last activity: .