Our short steel blank is drawn at the mill fixture with no gripper body or open door, and I cannot use that FR10 picture to choose a stand position or explain the future unloading route to an operator.
I cannot choose an FR10 stand position from this unloading sketch
SamArcher0420 · 17 Mar 2026, 12:56 UTC
8 replies
Replying to SamArcher0420
Who is responsible for the combined machine and tool model?
6pointsReplying to RosaAli0205
The integrator, but their drawing request names the closed machine envelope only.
1pointsReplying to SamArcher0420
That request needs correcting before they produce a very precise wrong drawing.
13pointsReplying to SamArcher0420
Our machine survey missed a door handle because the supplier's envelope showed the panel only. It mattered more than the panel. I'd have the machine owner check the opened arrangement against the machine, including the things people have added since delivery.
19pointsReplying to SamArcher0420
And Sam, include the setter's route in that same request.
1pointsReplying to FelixBrooks0806
Felix, did the handle change your stand position or just the proposed approach?
2pointsReplying to ImranAli0218
The proposed approach. We hadn't fixed the stand. The new route still needed checking with the complete tool, so we didn't treat avoiding the handle as the end of it.
19pointsReplying to RosaAli0205
Sam, did the integrator accept the expanded survey request?
20pointsDiscussion closed
This discussion is closed to new replies after six months without activity. Last activity: .