The aluminium puck now tips in the fingers during pickup, and the latest correction has joined two earlier point changes. The tray still looks fixed, but nobody has inspected its pocket seats. I'd like maintenance to find the change before we add a fourth explanation in coordinates.
our fr5 puck starts leaning before the tray moves
CallumBrown0882 · 8 Apr 2026, 04:44 UTC
9 replies
Replying to CallumBrown0882
Does the puck sit flat before the fingers touch it?
19pointsReplying to JackBennett0776
Not in the affected pocket. A thin gap is visible under one edge before contact, which I had missed when looking at the tray base.
15pointsReplying to CallumBrown0882
Compare the affected puck in another checked pocket and an accepted puck in this one during the bench inspection. That should help separate the part from the seat without teaching around either.
21pointsReplying to FionaBrooks0847
The lean follows the pocket. Tooling found a raised edge on its replaceable insert. Both pucks sit flat in the checked pocket, and quality accepted their locating faces.
4pointsReplying to CallumBrown0882
Does the insert match its drawing?
6pointsReplying to JackBennett0776
And find whether that edge was made that way or damaged later. I wouldn't order a duplicate until tooling has compared the contact detail with the intended seat.
10pointsReplying to FionaBrooks0847
It is impact damage on the fitted insert, not the drawing shape. Tooling has approved replacement to the existing drawing. Thanks, Fiona, the cross-comparison was quick and very clear.
23pointsReplying to CallumBrown0882
Who reviews the accumulated pickup changes after replacement?
0pointsReplying to JackBennett0776
Our integrator has the saved versions and the inspection finding. Replacement, compensation review and full transfer checks are still ahead; the bench comparison has given them a specific fault to work from.
18pointsDiscussion closed
This discussion is closed to new replies after six months without activity. Last activity: .