Our FR5 unloading sketch fits the aluminium blank through the opening. Who should check the gripper and open door together?
Our FR5 blank clears a door the gripper hasn't met
GabrielAli0192 · 25 Sept 2025, 15:21 UTC
6 replies
Replying to GabrielAli0192
The integrator should coordinate that with the toolmaker and machine owner; is the opening measured from your machine?
9pointsReplying to LucaArcher0352
Catalogue drawing only. Our added door handle isn't on it.
21pointsReplying to GabrielAli0192
Then the machine owner needs to supply the actual door survey, including that handle, before the combined route is assessed
10pointsReplying to LucaArcher0352
Survey requested. Toolmaker is adding the adapter and fittings to the gripper model too.
5pointsReplying to GabrielAli0192
Has that combined model come back, or are the two teams still passing separate drawings around?
20pointsReplying to GabrielAli0192
Gabriel, give the integrator ownership of one combined review with the held blank, grip depth, loaded exit and empty return; the separate drawings are inputs, not an access decision.
20pointsDiscussion closed
This discussion is closed to new replies after six months without activity. Last activity: .