Our FR5 fixture-exchange sketch reaches the steel blank, but leaves out the gripper and open door. Need a fuller check.
FR5 steel-blank path with the gripper missing
AdaBell0651 · 17 Oct 2025, 18:27 UTC
10 replies
Replying to AdaBell0651
Combine the loaded tool and measured machine opening, then review entry, exchange and withdrawal with the setter involved.
1pointsReplying to AdaBell0651
Include the adapter and fittings. They take up space too.
16pointsReplying to HarishCarter1011
Toolmaker has those drawings. Machine owner still owes the open-door survey.
8pointsReplying to AdaBell0651
Keep the stand location provisional while those inputs are missing. Have one person coordinate the combined review so separate correct drawings do not get treated as proof that the assembly fits.
-2pointsReplying to ElliotBrown0944
Ada, who will own that combined review?
13pointsReplying to HarishCarter1011
Integrator. Both drawing owners have agreed to send their information there.
9pointsReplying to AdaBell0651
And the actual held-blank position, not a loose part alongside the tool.
4pointsReplying to DavidBaker0519
David's point is worth checking explicitly. Grip depth can change what reaches the doorway first, even when everyone is using the correct individual part models.
18pointsReplying to DavidBaker0519
Held position added to the request. No combined route result yet.
-2pointsReplying to AdaBell0651
Keep the setter's access question open alongside it, including where the removed fixture goes.
8pointsDiscussion closed
This discussion is closed to new replies after six months without activity. Last activity: .