FarahAli0243 · 9 Jun 2025, 08:22 UTC
Does the same physical bezel show the line in the same place when you inspect it away from the station?
5 pointsNo. I can see a small mark beside one hole, but not the broad line across the face. The broad line changes when I tilt the bezel under the lamp.
3 pointsCan you identify that bezel in the existing image folder?
18 pointsWe had a similar muddle with trial photos where every part was called sample one. We kept one marked piece and photographed it again in the agreed inspection setup. Much easier to discuss the little real mark without mixing it up with the bright band.
9 pointsFarah, were those existing images captured with the same lighting settings, or has somebody been trying alternatives?
9 pointsThey were trying alternatives. The filenames do not say which settings were used, and I cannot identify my bezel in that folder. We will make a new example set with identified pieces before the handover. I mean the inspection handover; the wider cell work is still continuing.
6 pointsKeep the old folder apart from the operator examples. We left ours beside the new set and someone printed the first picture they found. All that sorting, and the wrong photo still ended up on the bench.
11 pointsThis discussion is closed to new replies after six months without activity. Last activity: .