JamieAllen0295 · 20 Dec 2025, 07:36 UTC
Yes. A different grip or orientation chosen to clear the mill can change the receiving transfer as well. Give the integrator the complete tool, intended held position and both ends of the job, with the actual machine obstructions.
-2 pointsThat's the bit I was worried about, Jonas; the proposed receiving tray expects the blank in its original orientation, while the mill sketch turns it on exit
0 pointsThen show where that orientation changes with the actual tool and blank, because an arrow between two nice endpoints can hide quite a lot of awkward metal
0 pointsThe integrator has agreed to include that transition, Jo, and the mill owner is checking the open-door envelope; no new route drawing yet
3 pointsIs the receiver's rim in the model? Fingers need somewhere to open after placement.
13 pointsNadia, useful. Jamie, include the actual receiving insert as well as the tray exterior. We once had an apparently unchanged tray whose replacement insert altered the available space.
14 pointsThe rim and fitted insert are in the supplied tray model, Nadia and Jonas; the missing geometry is still on the tool and door side, and I've left those named in the request
9 pointsDid they return the complete route after that, Jamie?
20 pointsThis discussion is closed to new replies after six months without activity. Last activity: .