Grippers & tooling
Choosing a Schmalz FQE gripper for a Fairino robot
Evaluate a Schmalz FQE for a Fairino application by checking the exact variant, mounted mass, adapter, utilities and carton trials before committing to a tool.
Fairino FR5
Published specifications & owner discussion
SPECIFICATION PROFILE
A compact 5 kg collaborative robot to evaluate for light handling, assembly, and machine-tending projects.
| Nominal payload | 5 kg |
|---|---|
| Reach | 922 mm |
| Pose repeatability | ±0.02 mm |
| Axes | 6 |
Source checked . Manufacturer specifications.
Product image:Fairino / Devonics.
Before you shortlist it
A useful middle ground to investigate when the FR3 workspace is tight. The complete end effector, not just the part, decides how much payload remains.
- Weigh the tool, mounting plate, fittings and part together.
- Test access inside the machine, including the approach and withdrawal.
- Request a full-cycle demonstration and an itemised delivery scope.
Ask the supplier to demonstrate your complete application with representative parts and tooling. Confirm the exact configuration, controller, interfaces, local support, and delivery scope.
This profile records published information. Community reviews should describe the installation, time in use, and observed results.
Read community discussionsRelated buying guides
Robot directoryFairino robots
FAIRINO FR5 Payload Budget: Count the Whole Tooling Assembly
Build a defensible FR5 payload budget covering grippers, fingers, adapters, services and parts, then identify the load evidence your integrator needs to approve.
Fairino robots
FAIRINO Demo Acceptance Test: Evidence to Request Before Buying
Design a FAIRINO demonstration that tests your parts, complete cycle, recovery and handover, with measurable acceptance criteria and an honest record of limitations.