I've paused our FR5 bezel example folder. One accepted part gets a bright diagonal stripe when it sits against the other nest edge. Both pictures are labelled scratches. We need the seating sorted too.
Bezel scratch labels from two different seating positions
ChloeBaker0483 · 24 Sept 2025, 17:46 UTC
11 replies
Replying to ChloeBaker0483
Can the bezel actually move between those edges when fitted?
21pointsReplying to SaraCarter0983
Yes, there's play in the temporary holder. I can seat it against either edge before the photograph. The folder doesn't say which edge was used.
13pointsReplying to ChloeBaker0483
Have tooling check the intended location before you collect another reference set.
9pointsReplying to ChloeBaker0483
Who decided the part was accepted? I only ask because we once kept repeating somebody's first label after the sample had picked up a fresh mark. The same object isn't necessarily in the same condition forever.
5pointsReplying to RachelBrown0957
Quality checked it again, Rachel. Still accepted. They've identified a separate nicked bezel for comparison and marked the nick location on an annotated copy.
18pointsReplying to ChloeBaker0483
Use the accepted and nicked parts through the same lighting comparison once the seating is repeatable, because fixing the holder alone may not make the actual defect visible
14pointsReplying to ChloeBaker0483
And retain the old views as examples of the seating problem, clearly labelled.
6pointsReplying to SaraCarter0983
Holder revision is proposed, not built yet. Sara, old views are in a separate diagnostic folder. Rebecca, the comparison request includes both physical samples and the intended camera setup.
8pointsReplying to ChloeBaker0483
Ask for repeat seating by the person who will load it as well, so the comparison does not depend on the tool designer gently settling each bezel by hand.
23pointsReplying to NoraChen1192
Added that, Nora. And thanks Rachel for asking about the actual part; quality now owns the sample checks, instead of the folder label doing all the work.
0pointsReplying to ChloeBaker0483
Has the holder been made yet?
7pointsDiscussion closed
This discussion is closed to new replies after six months without activity. Last activity: .