Our imported handling package stops intermittently (Fairino FR5)

MayaArcher0388 · 8 Aug 2026, 03:50 UTC

Reply to discussion
MA
MayaArcher0388
We bought an imported handling package from an unnamed seller through the Alibaba marketplace. It uses Fairino FR5 for tray loading with a machined polymer sleeve in a supervised tray handling cell and stops intermittently. My support report has been open for 15 days. The seller requested more information after receiving my phone video, and I need to understand what would narrow the fault down.

17 replies

CA
CalebBennett0754
Replying to MayaArcher0388

Have you captured the exact alarm before restarting? Also, does the stop happen before release, during it, or after it?

16 points
MA
MayaArcher0388
Replying to CalebBennett0754

@CalebBennett0754 I now have the alarm indicating a missing process confirmation. Reviewing the unedited video places the wait before release, so my original description of a dropped workpiece was inaccurate.

13 points
CA
CalebBennett0754
Replying to MayaArcher0388

Correct the ticket with that alarm, the unedited clip and the installed versions. Ask which confirmation is missing and who owns the next diagnostic step

11 points
MA
MayaArcher0388
Replying to CalebBennett0754

Should I preserve the original report when I correct it? Removing that wording might make it difficult to understand why support's existing replies focused on a drop.

7 points
CA
CalebBennett0754
Replying to MayaArcher0388

Leave the original account readable and add the correction prominently. Explaining that the unedited recording shows a wait before release gives support a reason to revise its diagnostic focus

24 points
SO
SofiaAdams0108
Replying to CalebBennett0754

@CalebBennett0754 My own support case stalled because the robot and gripper contacts each expected the other to arrange the test. A named coordinator clarified who would organise the next action.

19 points
MA
MayaArcher0388
Replying to SofiaAdams0108

@SofiaAdams0108 Our correspondence shows a similar coordination gap. Both contacts refer me back to the other's response, and I can't find an assigned owner for the test.

9 points
CA
CalebBennett0754
Replying to MayaArcher0388

That missing confirmation points to the gripper, so its contact should take the diagnostic lead

9 points
ZA
ZaraBrown0917
Replying to CalebBennett0754

You're jumping from a missing signal to a failed component. It could be the interface or sequence. The alarm doesn't assign ownership by itself

6 points
CA
CalebBennett0754
Replying to ZaraBrown0917

You're right; I assigned the cause too early. Ask the package seller to coordinate tracing that confirmation across the interface, with both contacts involved as needed

12 points
CH
ChenBennett0703
Replying to CalebBennett0754

@CalebBennett0754 When you say the seller should coordinate this, do you mean Alibaba or the business that supplied the package through the marketplace?

15 points
CA
CalebBennett0754
Replying to ChenBennett0703

@ChenBennett0703 The unnamed seller who supplied your package. Alibaba is the marketplace; your technical request here is to the seller and their support contacts

17 points
MA
MayaArcher0388
Replying to CalebBennett0754

@CalebBennett0754 I've several logs but haven't established which capture the event. Is sending the entire collection useful, or should I narrow the attachment set?

19 points
CA
CalebBennett0754
Replying to MayaArcher0388

@MayaArcher0388 Have support identify the required diagnostic files, then associate the supplied files with the recorded event and explain how they were collected. A large unrelated collection can make the relevant evidence harder to find

20 points
SO
SofiaAdams0108
Replying to CalebBennett0754

In my support case, descriptive attachment names made it easier for both support and me to locate the relevant recording. Generic revision names had made the collection unnecessarily confusing.

11 points
MA
MayaArcher0388
Replying to SofiaAdams0108

Correcting the symptom hasn't yet produced an agreed next step with support. We still lack a diagnostic action and the underlying issue is unresolved.

9 points
CA
CalebBennett0754
Replying to MayaArcher0388

Understood. Better symptom wording hasn't yet turned into an agreed test

18 points

Add to the discussion

Welcome to Application Robot

Everyone can read the forum. Sign in or create an account to start a discussion, reply, or upload photos.

Forgot your password?

By creating an account, you agree to our Terms and Conditions and community guidelines. Read our Privacy Policy for how your information is handled.