ReeceArcher0384 · 21 Jul 2025, 15:25 UTC
Check fitted fingers, mount and fixture location first, with maintenance safely isolating the equipment for inspection.
3 pointsMaintenance has it isolated. Replacement finger fitted before the first edit. Stores checking its reference.
21 pointsCheck the actual finger, not just the issue slip. I've seen the right bin contain the wrong insert. What does the fitted contact look like against the puck?
7 pointsOne face contacts at the puck's radius. Toolroom comparing finger geometry and fixture seating height.
14 pointsKeep the edited programs for that review too. Restored tooling may make those offsets wrong.
10 pointsIs the puck seated at the drawing height? A wrong fixture insert can move the contact onto the radius even with the correct fingers.
4 pointsNot checked yet. Added it to the inspection, program copies retained. No cause agreed.
13 pointsOur shifts kept writing adjusted pickup and nobody knew which physical change preceded it. Put the actual finding in the handover when you have one, with the tray and tool references. Future you will be less annoyed.
16 pointsThis discussion is closed to new replies after six months without activity. Last activity: .