I need the installed revision and called routines for our bracket inspection. Screenshots cover neither. Integrator still available.
fr5 inspection handover is mostly screenshots
PavelArcher0353 · 24 Oct 2025, 22:40 UTC
13 replies
Replying to PavelArcher0353
On an inherited fixture we found the screenshots described a different nest. Ask for the complete installed program export with its revision and the fixture assumptions, not simply more pictures of the main routine.
13pointsReplying to PavelArcher0353
And the ordinary PLC exchange needs its own description. We have just withheld a lesson until both sides demonstrated the agreed normal and interrupted behaviour. Buttons and screenshots were not enough.
21pointsReplying to CarlaAbbott0053
Requested both. The main routine calls inspect_bracket, which is absent from the supplied folder.
4pointsReplying to PavelArcher0353
Name that missing dependency in the request, so the integrator knows another copy of the main routine will not close it.
7pointsReplying to PavelArcher0353
Does the fixture shown in the screenshots match what is fitted? It may help to photograph the installed identifier now, while the integrator can explain any difference.
11pointsReplying to EllaAllen0294
Fixture label matches drawing D. Screenshots have no readable identifier, so I can't assign them confidently.
17pointsReplying to PavelArcher0353
Keep them as unverified illustrations until the integrator matches them. The current label and drawing give you a starting point, but the handover should describe the actual installed arrangement and its required checks.
4pointsReplying to PavelArcher0353
Can the maintainer open the eventual export with their normal account? We had a wonderfully complete folder that only the visiting person's setup could use.
18pointsReplying to MeiAdams0168
Mei, that check belongs in the handover session too, not just in an email saying the backup was delivered.
13pointsReplying to PavelArcher0353
Called routine arrived. Integrator matched revision 4 to the installed job. Maintainer-account check still pending. Ordinary signal table incomplete.
8pointsReplying to PavelArcher0353
Which part of the signal table is missing, Pavel? That may help you get a targeted answer before the integrator finishes their involvement.
16pointsReplying to EllaAllen0294
Who clears the inspection request and what acceptance means. Asked both program owners to agree those entries.
12pointsReplying to PavelArcher0353
Keep those meanings distinct from completion, and have the handover demonstrate an interruption as well as the neat exchange. We removed keep-pressing advice from our own lesson for a reason.
0pointsDiscussion closed
This discussion is closed to new replies after six months without activity. Last activity: .