Fairino robots

The FR series, from first setup to the production floor.

Start a discussion

1,333 discussions

Which measured geometry belongs in my FR5 blank-unloading comparison?

CarlaBell0662 · 28 points · Fairino robots · 24 Aug 2026

I cannot shortlist this FR5 removal route from another empty-hand sketch

IsaacChan1129 · 37 points · Fairino robots · 24 Aug 2026

How do I compare FR5 exchange access when the door and hand are absent?

SarahAbbott0067 · 0 points · Fairino robots · 24 Aug 2026

Our FR10 mill-removal sketch still gives the gripper no occupied space

SarahArcher0415 · 12 points · Fairino robots · 24 Aug 2026

How do I include the actual hand in my FR10 blank-removal choice?

MarkChambers · 29 points · Fairino robots · 23 Aug 2026

My rebuilt laptop finds an FR5 SDK, just not the one the script expects

NinaAdams0153 · 10 points · Fairino robots · 23 Aug 2026

Why is the FR10 exchange route drawn without the hand or open door?

JackBaker0515 · 38 points · Fairino robots · 23 Aug 2026

Why does our FR10 read time out when the other laptop supposedly works?

LiamBaker0490 · 19 points · Fairino robots · 23 Aug 2026

I cannot explain why the second laptop completes our FR10 read

DineshAli0212 · 35 points · Fairino robots · 23 Aug 2026

my rebuilt laptop rejects the FR5 call before it reaches the network

SofiaCarter0978 · 22 points · Fairino robots · 23 Aug 2026

The supposedly working laptop has no recorded FR5 identity response

GabrielAli0192 · 38 points · Fairino robots · 23 Aug 2026

The FR10 reaches our blank in a drawing with no door or gripper

CallumBell0621 · 18 points · Fairino robots · 23 Aug 2026

My FR5 access drawing still stops at the brass blank

AlexBarnes0559 · 25 points · Fairino robots · 23 Aug 2026

My FR5 polymer-blank exchange needs the route missing from the reach sketch

RebeccaAbbott0082 · 23 points · Fairino robots · 22 Aug 2026

the FR5 unloading layout reaches a point but omits hand and door

NickChambers · 29 points · Fairino robots · 22 Aug 2026

our FR5 removal sketch gives the steel blank a hand with no size

IsaacAli0259 · 18 points · Fairino robots · 22 Aug 2026

Which FR5 brass-blank access checks depend on the missing loaded hand?

AdaBrooks0825 · 34 points · Fairino robots · 22 Aug 2026

FR10 ping is intermittent and my read-only status call times out

BeatriceChambers · 24 points · Fairino robots · 22 Aug 2026

I need the missing FR10 unloading dimensions before the next layout meeting

PriyaBell0655 · 29 points · Fairino robots · 21 Aug 2026

Polymer-blank removal needs a door position we can actually use

OliverBennett0711 · 22 points · Fairino robots · 21 Aug 2026