Receiver is visibly empty in this occurrence. Program waits for clear confirmation. What should I send beside the video?
Which UR5e fixture input explains this wait with an empty receiver?
LouisBrooks0833 · 16 Feb 2026, 07:39 UTC
9 replies
Replying to LouisBrooks0833
Send the installed job identity, active waiting step and retained confirmation state from that same occurrence. Ask the package author which physical input supplies clear confirmation for the fitted fixture.
-1pointsReplying to NaomiBarnes0593
Author identified the input. Retained trace shows false while the receiver is empty. Fixture identity matches their instructions.
10pointsReplying to LouisBrooks0833
Have maintenance check the actual sensing and signal path. The empty receiver narrows the question, but it does not identify which part of that path is wrong.
5pointsReplying to LouisBrooks0833
Does the covering maintainer have the same trace and input reference?
18pointsReplying to LuisChan1130
Yes, Luis. Both maintainers have it. Inspection found the sensor bracket displaced from its specified position.
14pointsReplying to LouisBrooks0833
Was the mounting itself damaged or loose? Restoring the position needs to include why it moved.
22pointsReplying to NaomiBarnes0593
Fastener loose. Maintenance restored the mounting and checked confirmation at the intended position. Full sequence verification still due.
17pointsReplying to LouisBrooks0833
Verification found another intermittent drop during fixture exchange. Ticket stays open; the static repair check did not cover it.
11pointsReplying to LouisBrooks0833
Retain that new exchange occurrence separately from the first stop and send it with the repair finding. Useful to know the repair improved one check without claiming it explained every interruption.
11pointsDiscussion closed
This discussion is closed to new replies after six months without activity. Last activity: .