Applications & integration

Machine tending, welding, palletising, and end-of-arm tooling.

Start a discussion

3,716discussions

our straight row has come back turned again

AmaraBaker0513 · 31 points · Applications & integration · 17 Mar 2026

How do I stop our panel trial counting two sheets as one success?

LucyBarnes0567 · 36 points · Applications & integration · 17 Mar 2026

the bracket correction has no time allowance

CalebBrown0928 · 25 points · Applications & integration · 17 Mar 2026

Why does reconnect add another accepted plate without another FR5 result?

ZaraBell0656 · 9 points · Applications & integration · 17 Mar 2026

Our FR5 upper layer approval assumes a different first layer

SofiaAli0195 · 26 points · Applications & integration · 17 Mar 2026

UR5e support review missing the first carton above the gap

HanaChan1057 · 27 points · Applications & integration · 17 Mar 2026

our fr5 turned row is back in a drawing for another carton

ElliotCarter1031 · 28 points · Applications & integration · 17 Mar 2026

Which receipt should clear our FR10 plate-inspection request?

MeiChan1125 · 16 points · Applications & integration · 16 Mar 2026

How do I count our FR10 brackets without counting every retry as another part?

LucyBarnes0567 · 11 points · Applications & integration · 16 Mar 2026

The released bracket fails, but the final pass has no correction entry

AdaAdams0129 · 31 points · Applications & integration · 16 Mar 2026

our bracket correction has a duration but no actual work time

DavidCarter1041 · 8 points · Applications & integration · 16 Mar 2026

How do I compare our UR5e short-order finish without turning the unsupported cartons?

ChloeAli0222 · 16 points · Applications & integration · 16 Mar 2026

Why does reconnect add an FR5 coupon we already counted?

BethAdams0150 · 5 points · Applications & integration · 16 Mar 2026

Our FR10 carton drawing supports the fingers but not the carton ends

BrunoBrooks0800 · 14 points · Applications & integration · 16 Mar 2026

Brass-sleeve stick-out readings without blank lengths

HarishBrooks0837 · 17 points · Applications & integration · 16 Mar 2026

Our FR5 bracket estimate counts an angle check as a released hole check

AmaraCarter1035 · 27 points · Applications & integration · 16 Mar 2026

I can't explain our UR5e request light when the application never sees it

LeahChan1104 · 12 points · Applications & integration · 16 Mar 2026

Why can our FR5 nest insert fit backwards and still look right?

OwenAllen0312 · 19 points · Applications & integration · 16 Mar 2026

Aluminium blanks with different stick-out and no overall lengths

HarishCarter1011 · 34 points · Applications & integration · 15 Mar 2026

Can I tell what our bracket correction fixed from two ticks and a final pass?

HazelChan1093 · 30 points · Applications & integration · 15 Mar 2026